About Products:
650W MAX. Power: Punchy bass, high SPL, handles dynamic range without distortion.
Wide Dispersion: Balanced soundstage for optimal listening from any seat.
High power output, suitable for various music styles such as pop, classical, jazz, country, and rock, all of which can be well controlled.
Universal non-destructive support for installing various models.
High noise reduction, HiFi level experience, enjoy stereo surround sound on the stage board, combining technology and playability.
About Products:
Model: QP-6.5MD
Color: Black+RED
Impedance: 4Ω
Distortion: Less Than 1%
MAX POWER: 650W
RMS POWER: 220W
Audio Sensitivity: 90dB
Voltage: 12V~24V
Item Size: 6.5 Inch
ASV/CCAT25.5
Bullet Cap
SPL 90dB
voice coil 1"(25.5mm)kccaw
Frequency Range (Hz): 100Hz - 6KHz
Material Type: Metal & Magnet
Speakers Types: Mid-range Speakers
Applicable models: Universal Car, Truck, Bus, etc
About Products:
To protect the vehicle, cover it with a dust cloth.
Pry the door, unscrew the screws inside and around the door panel, and force outward from the bottom of the door panel to remove the door.
Remove the original car horn first fix the gasket on the original car horn.
1. To protect the vehicle, add a dust cloth to the vehicle
2. Remove the door panel (trim panel)
3. Remove the original car speaker
4. Fix the speaker bracket
5. Fix the speaker crossover
6. Connect the speaker terminals
7. Fix the speaker to the bracket
8. Connect the cross connection to the speaker wiring
9. Remove the original car speaker and replace the speaker
10. The reset and replacement of the door panel is completed
Attention:
1. Before buying, please confirm installation size, ensure the length and height of machine panel is suitable for your car.
2.Before installation, please carefully check the car horn lines, if grounding, please reconnect the lines before linking our machine, otherwise it may burn the machine.
3.The actual power of the speaker itself is not very large, there will be murmurs and buzzing when the speaker is very loud.
4.There will be murmurs and buzzing when the reconfiguration process is not connected correctly.
5. If there is no power amplifier installed, the sound of the main unit is not good and the power is not good, there will be murmurs and buzzing when the speaker is loud.
6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
7. Please allow 1-2cm measuring deviation due to manual measurement.
