Dear friends, thank you very much for liking our products. All the marked product dimensions are the dimensions of the cylinder inner diameter. All products are made of molds, so there is a slight error between each product. The error range of each product is 1-2mm.
• Intelligent mode or manual mode is optional
• In intelligent mode, you can set and remember the selected optimal vacuum, and automatically perform intelligent extraction cycle to provide the safest and most pleasant experience.
• All workout data is clearly displayed on the LCD screen.
• High end acrylic transparent cylinder with vacuum valve on top to maintain vacuum inside the cylinder even after disconnection.
• Clear canisters available in centimeters and inches.
• High-end ultra-quiet, leak-proof motors.
•USB charging.
• Easy to remove and clean.
• Materials: acrylic (transparent cylinder), silicone (hose), ABS (pump)
●Manual mode
1. Cllck the key to start pumping. When the required pressure is reached, press the key again tostop pumping.
2. Click Air release button to release some pressure. If you need to release all pressure, long press Air release button,
3. In manual mode, the manual lcon dlagram will be displayed on the lower left side of the display screen.
Smart Mode
1. ClIick the Power Button to start pumping, and when the required pressure is reached,press the Power Button again to stop purnplng.
2. Press and hold the Smart Button for 3 seconds, the memory iconwill appear in the middle of thelower part of the display, indicating that the pressure value has been stored.
3. Press and hold the Smart Button again for 3 seconds,the memory iconon the display disappears,indicating that the stored pressure value has been deleted.
4. Cllck the Smart Button to enter the Smart mode, and the smart mode icon will appear in the lower rightcorner of the display.
5. In the smart mode, the vacuum pump will automatically complete the pumpIng and alr roleasing cycle, click the Smart Button to switch between 6 different smart modes.
The six smart modes are as follows:
Smart mode 1: Pump air to the set maximum value, and then immediately release all air, and cycle
automatically for 20 minutes.
Smart mode 2-5: According to the set maximum value,the free variable frequency pumping and air
releasing cycle will be performed, and it will automatically stop after 20 minutes.
Smart Mode 6: Pump air to the set maximum value, hold the pressure for 1 minute,then release all air,
and cycle automatically for 20 minutes.
6. in smart mode, you can click Power Button or Air Release Button at any time to return toManual mode.
The material is made of environmentally friendly acrylic block, reliable quality and safe use
Working principle of pump
Drawing blood increases blood flow to the penis area, which stimulates a firmer, longer lasting erection. Suction also improves sensitivity, AIDS in endurance training, and temporarily increases penis size. A 10-minute exercise can thicken and lengthen your penis, and regular use can have permanent results
1.To connect the tubing, pressand twist the connector atthe end of the tube
2.When you hear the click,the tubing is fully inserted.
3.To remove, push the metal tabinward and pull the tubing at thbase.You can remove the tubinand pump while maintainingpressure in the cylinder.
Power on/off Press and hold the Power Button for 3 seconds to power on, and the display will light up. Pressand hold the Power Button for 3 seconds to shut down, and all pressure will be automatlcallyreleased at the same time.
